Products – Advanced Equipment

100% Copper Earth Cable

adva6687 — Thu, 19 Nov 2020 13:35:12 +0000

Either twist mate plug or cable lugs, work clamps, work cable and electrode cable. Rated 350 amps, 500 amps or 600 amps
Cut to requirement

Satech Doors

adva6687 — Thu, 19 Nov 2020 13:33:15 +0000

A Complete and Versatile Range

The range of SATECH doors has been developed to meet customer demands, however complex, including sliding doors with openings up to 6 meters, without upper or lower guides, to allow the passage of lift trucks. A comprehensive range of (optional) accessories allows for varying safety levels and locking systems, as well as doors adapted to meet specific requirements. More than 350 combinations are already available.

Satech Heavy Safety Fence

adva6687 — Thu, 19 Nov 2020 13:31:39 +0000

Perimeter Protections Series – STRONG/HEAVY

Protection and accident prevention system consisting of 60×60 uprights and 20×20 or 30×30 (HEAVY) panels with frames connected by SATECH patented fast assembly clamps. This series is used in heavier applications such as industrial robotics or the steel industry.

SPECIFICATIONS

Panels Frame: 20 x 20/ 30 x 30
Mesh: 22 x 100 x 3
Painting: Epoxy polyester powder (indoor use)

DIMENSIONS

Bases:
200, 300, 700, 800, 1000, 1200, 1500
Heights:
(960)*, (1260)*, 1500, 1900, 2080, 2480, 2860
*NOTE: (h) = ONLY ON DEMAND

Satech Basic System

adva6687 — Thu, 19 Nov 2020 13:29:42 +0000

Perimeter Protection Series – BASIC

Protection and accident prevention system consisting of 40×40 uprights and 20×20 panels with 20×20 frames, connected by screws or SATECH patented fast assembly clamps. It is the standard method used in all guards for plant and machinery

SPECIFICATIONS

Panels Frame: 20 x 20
Mesh: 22 x 100 x 3
Painting: Epoxy polyester powder (indoor use)

DIMENSIONS

Bases:
200, 300, 700, 800, 1000, 1200, 1500
Heights:
(960)*, (1260)*, 1500, 1900, 2080, 2480
*NOTE: (h) = ONLY ON DEMAND

Vertical Flux Oven

adva6687 — Thu, 19 Nov 2020 13:17:46 +0000

Vertical Type Flux Oven designed for Re-Baking, Aging and Moisture Free of Submerged Arc Welding Flux. PID MICRO-PROCESSOR POWER CONTROLLER. All Flux ovens are fitted with high temperature door gasket to prevent heat loss.

Portable Type Electrode Oven P10A

adva6687 — Thu, 19 Nov 2020 13:15:17 +0000

Portable Type Electrode Oven designed for Holding of welding electrode to keep it constantly warm. The unit uses Tubular Heating Element for greater heating efficiency and reliability. Provide constant heating temperature.

Capacity (Rod Lght. 450mm) : 10kgs (+/-)

Temperature Range: 150°C (302°F)

Input Voltage: 220-240VAC

Input Power: 160W

External Dimension (H x D x W): 172 X 200X 625

Internal Dimension (H x D x W): 100 X 100 X 500

Body Insulation (Rock wool): 25mm

Net Weight: 6kgs

Portable Type Electrode Oven P5A

adva6687 — Thu, 19 Nov 2020 13:14:04 +0000

Capacity (Rod Lght. 450mm) : 5kgs (+/-)

Temperature Range: 150°C (302°F)

Input Voltage: 220-240VAC

Input Power: 160W

External Dimension (H x D x W): 150 X 175X 630

Internal Dimension (H x D x W): 76 X 76X 500

Body Insulation (Rock wool): 25mm

Net Weight: 5 kgs

BS151B electrode Oven

adva6687 — Thu, 19 Nov 2020 13:12:33 +0000

Bench Type Electrode Oven designed for Re-Baking, Re-Conditioning and Holding of welding electrode for high quality weld with build in temperature gauge & adjustable thermostat control.

Removable shelves for the drying of wire coil & pre-heat / post-heat of welded parts.

Stainless Steel internal body to prevent rust.

BS 151B

Digital Controller with Solid State PID power control

Fully Stainless Steel body

Capacity (Rod Length. 450mm) : 155 kgs (+/-)

Temperature Range: 30°C ~ 400°C (86°F ~ 752°F)

(Average Stabilized)

Input Voltage : 1ph, 220-240VAC

Input Power: 1800W

External Dimension (H x D x W) : 660 x 720 x 570 mm

Internal Dimension (dia. x deep) : 455 x 520 mm

Body Insulation (Ceramic wool) : 50mm

Net Weight : 48kgs

BM 151B Electrode Oven

adva6687 — Thu, 19 Nov 2020 13:11:03 +0000

Bench Type Electrode Oven designed for Re-Baking, Re-Conditioning and Holding of welding electrode for high quality weld with build in temperature gauge & adjustable thermostat control.

Removable shelves for the drying of wire coil & pre-heat / post-heat of welded parts.

Stainless Steel internal body to prevent rust.

Digital Controller with Solid State PID power control

Capacity (Rod Length. 450mm) : 155 kgs (+/-)

Temperature Range: 30°C ~ 400°C (86°F ~ 752°F)

(Average Stabilized)

Input Voltage: 1ph, 220-240VAC

Input Power: 1800W

External Dimension (H x D x W) : 660 x 720 x 570 mm

Internal Dimension (dia. x deep) : 455 x 520 mm

Body Insulation (Ceramic wool) : 50mm

Net Weight : 43kgs

CO2 Electrically Heated Regulator

adva6687 — Thu, 19 Nov 2020 13:07:51 +0000

CO2 Electrically Heated Regulator is a Single-Stage Construction Gas Pressure Regulator for CO2 gas. This regulator features a medium flow and more stable delivery pressure particularly suitable for high pressure cylinder application.

CO2 MIG applications

Heated Regulator

Single stage construction

Machined brass body

Piston design

Accurate gas flow regulator

Safety relief valve is set for all gases

No soldered joints, for easy maintenance

Combination of regulator and flowmeter in one unit

Side entry

Economy style

Input Voltage 220V