• Operating Versatility– Easily adapt to a wide range of wire feed speeds and wire sizes.
• Compact Units With Excellent Flexibility– Fit into simple fixtures or the most complex automated production lines.
• Rugged Construction– Minimize downtime and maintenance costs.

The DC-1000 offers 1300 amps of smooth DC output, combining pure welding power with multi-process flexibility for semiautomatic and automatic welding.

• 500 amp output connections– provide enhanced arc characteristics for low amperage submerged arc and MIG welding procedures.
• Single range control– for precise output control and easy operation.
• Terminal strip and output studs– for remote connections and cable.
• Low profile case– allows installation under a workbench and for stacking up to 2 machines to conserve floor space.
• Removable side panels– for easy access to internal parts.
• Internal components– including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion.

Rugged construction, simple controls and a 100% duty cycle output rating make these machines a sound investment for heavy duty shop applications. Add the outstanding traditional SCR rectifier arc action delivering high quality, attractive welds and your operators will agree – it’s hard to go wrong with an Idealarc® 600.

• Full range output voltage controlfor easy operation and precise control.
• Standard analog ammeter and voltmeter.
• VRD™ (Voltage Reduction Device™) reduces OCV (open circuit voltage) when not welding for added safety (select models).
• Mode switch for selecting desired output characteristics.
• 115V, 15 amps, duplex auxiliary power receptacle – (60 Hz models) makes it easy to power lights, grinders and other shop tools at your work station.
• Flat-top casewith a small footprint can be placed under a workbench or stacked up to 3 high on top of each other.

Windings and rectifiers are protected against moisture and corrosive environments.

Rugged construction, simple controls and a 100% duty cycle output rating make these machines a sound investment for heavy duty shop applications. Add the outstanding traditional SCR rectifier arc action delivering high quality, attractive welds and your operators will agree – it’s hard to go wrong with an Idealarc® DC400.

• Full range output voltage control for easy operation and precise control.
• Standard analog ammeter and voltmeter.
• Mode switch for selecting desired output characteristics.
• Flat-top case with a small footprint can be placed under a workbench or stacked up to 3 high on top of each other.
• Windings and rectifiers are protected against moisture and corrosive environments.

The constant current welding rectifier HOT ROD 500-S is a three phase heavy duty power source with a current range of 50-625A. This machine is fan cooled and enclosed in a rigid case with removable side panels for convenient servicing, and on a frame suitable for stacking up to three machines. The control circuit compartment is totally potted for complete protection and located behind an inspection panel for easy access. The unit is completely weatherproof and designed for extreme environmental conditions. Whether using mild steel, low hydrogen, stainless steel or hardfacing electrodes, the HOT ROD 500-S produces a smooth, quality arc for consistent results day-in day-out. If you need a reliable machine for arc air gouging, the HOT ROD 500S can help you do that too.

• Excellent arc characteristics for a wide range of electrode types.
• Maximum output of 625Aallows the use of electrodes up to 6.3 mm and air carbon gouging with 8mm electrodes.
• Desert ratingoperating temperature up to 55°C.
• Stackable case design with built-in hook. Easy storage and handling.
• Submersion dipped transformer assembly and fully potted Power Circuit Board for added corrosion and moisture protection.
• Input voltage compensation for constant output.
• Thermostatic overload protection

5-230 amps is the widest welding range in its class.

Patented Micro-Start II Technology delivers extremely stable low amperage starting, welding and cratering for AC and DC welding.

FREE TIG Pulser – Optimal heat input control results in reduced warping and burn-through on thin materials and improved appearance.

Excellent Stick Welder – even with Fleetweld 5P (E6010).

AC Auto Balance automatically sets the optimal cleaning vs. penetration levels for great looking aluminum welds.

Standard NEMA 6-50 plug on 9 ft. (2.7 m) input power cord with receptacle. (208/230 volt models only).115 volt auxiliary power receptacles with 20 amp service reliably powers water coolers or other tools (208/230V model only, all other models 6 amps).

Standard torch parts storage compartment and cable hanger keeps you organized.

Ready-Pak models include a Pro-Torch PTA-17 air-cooled 150 amp torch with 12.5 ft. (3.8 m) Ultra-Flex cable.

Fan-As-Needed (F.A.N.) prevents overheating. F.A.N. reduces power consumption noise, motor wear and dust in the machine.

CSA C/US certified.

Includes:
• Precision TIG 225 (208/230/1/60)
• Under-Storage Cart (K2348-1)
• Torch Parts Storage Compartment
• Torch Hanger
• 10 ft. (3.0 m) Work Cable & Clamp
• Removable Lift Eye
• 9 ft. (2.7 m) Input Power Cord with NEMA 6-50P Plug
• NEMA 6-50R Receptacle
• TIG Procedure Guide
• GTAW (TIG) Handbook
• Stick Electrode Holder K2374-1 Sold Separately (Not Included)

PTA-17 One-Piece TIG Torch includes:
• 12 ft. (3.6 m) Ultra-Flex Cable
• Twist Mate Adapter
• 3/32 in. (2.4 mm) 2% Thoriated Tungsten
• Collet & Collet Body
• 7/16 in. (11.1 mm) Alumina Nozzle
• Long Back Cap
• Gas Regulator with Hose
• Foot Amptrol (K870)

Take advantage of this inverter-based power source to achieve high input power efficiency and power factor ratings for real savings on your electric bills and decrease your welding cost

Heavy fabrication welding operations will appreciate the broad multi-process performance of the CV/CC 500 — featuring robust stick, MIG and cored wire welding as well as precision Touch-Start TIG performance

• Solid and flux-cored wire up to 2.0mm
• Welding voltage, Current / Wire Feed Speed can be adjusted easily on the wire feeders.
• Cold inch and gas purge functions are located on the front panel of the wire feeders
• The drive roll design provides reliable feeding and is able to be changed easily
• The wire feed speed range varies from 1.5m/min to 22m/min

Processes
• Stick
• Flux-Cored
• MIG
• TIG
• Gouging

Features
• Easy process selection
• Fully encapsulated and environmentally protected electronics
• Compatible with across-the-arc, analog, digital, or crosslinc feeders
• Lightweight and portable
• Full functionality without control cables
• Enables remote procedure setting at the feeder
• Voltage reduction device reduces open circuit voltage for added safety
• Capable of arc gouging with 3/16 inch carbons

Power Source Quick Specs
• 380-600 Volt 3 phase power
• Weight – 82lbs (Standard Model) | 77lbs (Construction Model)
• Duty Cycle – 100% at 300 amps | 60% at 350 amps
• Output Range – 5-425 amps
• Dims – 17 in H x 13 in W x 23 L

LF-72 Feeder Quick Specs
• Solid wire range – .023 – 1/16 in
• Cored wire range – .030 – 5/64 in
• Wire speed range – 50 – 800 ipm
• Dims – 12.5 in x 10.0 in x 22.5 in
• Weight – 48.5 lbs

Includes
• Flextec 450 power source (standard model) (K4272-1)
• 8.5 ft power cord (no plug)
• LF-72 bench model feeder (K2327-7)
• 15 ft Magnum pro curve 300 gun (K2951-2-10-45)
• 2 drive roll and wire guide .035-.045 solid wire (K1696-1)
• 10 ft work cable with clamp and 10 ft electrode holder (K1803-2)
• 10 ft Harris flowmeter regulator and hose