Equipment – Advanced Equipment

Vertical Flux Oven

adva6687 — Thu, 19 Nov 2020 13:17:46 +0000

Vertical Type Flux Oven designed for Re-Baking, Aging and Moisture Free of Submerged Arc Welding Flux. PID MICRO-PROCESSOR POWER CONTROLLER. All Flux ovens are fitted with high temperature door gasket to prevent heat loss.

Portable Type Electrode Oven P10A

adva6687 — Thu, 19 Nov 2020 13:15:17 +0000

Portable Type Electrode Oven designed for Holding of welding electrode to keep it constantly warm. The unit uses Tubular Heating Element for greater heating efficiency and reliability. Provide constant heating temperature.

Capacity (Rod Lght. 450mm) : 10kgs (+/-)

Temperature Range: 150°C (302°F)

Input Voltage: 220-240VAC

Input Power: 160W

External Dimension (H x D x W): 172 X 200X 625

Internal Dimension (H x D x W): 100 X 100 X 500

Body Insulation (Rock wool): 25mm

Net Weight: 6kgs

Portable Type Electrode Oven P5A

adva6687 — Thu, 19 Nov 2020 13:14:04 +0000

Capacity (Rod Lght. 450mm) : 5kgs (+/-)

Temperature Range: 150°C (302°F)

Input Voltage: 220-240VAC

Input Power: 160W

External Dimension (H x D x W): 150 X 175X 630

Internal Dimension (H x D x W): 76 X 76X 500

Body Insulation (Rock wool): 25mm

Net Weight: 5 kgs

BS151B electrode Oven

adva6687 — Thu, 19 Nov 2020 13:12:33 +0000

Bench Type Electrode Oven designed for Re-Baking, Re-Conditioning and Holding of welding electrode for high quality weld with build in temperature gauge & adjustable thermostat control.

Removable shelves for the drying of wire coil & pre-heat / post-heat of welded parts.

Stainless Steel internal body to prevent rust.

BS 151B

Digital Controller with Solid State PID power control

Fully Stainless Steel body

Capacity (Rod Length. 450mm) : 155 kgs (+/-)

Temperature Range: 30°C ~ 400°C (86°F ~ 752°F)

(Average Stabilized)

Input Voltage : 1ph, 220-240VAC

Input Power: 1800W

External Dimension (H x D x W) : 660 x 720 x 570 mm

Internal Dimension (dia. x deep) : 455 x 520 mm

Body Insulation (Ceramic wool) : 50mm

Net Weight : 48kgs

BM 151B Electrode Oven

adva6687 — Thu, 19 Nov 2020 13:11:03 +0000

Bench Type Electrode Oven designed for Re-Baking, Re-Conditioning and Holding of welding electrode for high quality weld with build in temperature gauge & adjustable thermostat control.

Removable shelves for the drying of wire coil & pre-heat / post-heat of welded parts.

Stainless Steel internal body to prevent rust.

Digital Controller with Solid State PID power control

Capacity (Rod Length. 450mm) : 155 kgs (+/-)

Temperature Range: 30°C ~ 400°C (86°F ~ 752°F)

(Average Stabilized)

Input Voltage: 1ph, 220-240VAC

Input Power: 1800W

External Dimension (H x D x W) : 660 x 720 x 570 mm

Internal Dimension (dia. x deep) : 455 x 520 mm

Body Insulation (Ceramic wool) : 50mm

Net Weight : 43kgs

Oxygen Generator

adva6687 — Tue, 10 Nov 2020 08:16:30 +0000

The oxygen gas generation system uses a technology that separates nitrogen and oxygen molecules from a mixture of gases under pressure. This process utilizes the fact that under high pressure, gases tend to be attracted to solid surfaces, or “adsorbed”. The higher the pressure, the more gas is adsorbed. When the pressure is reduced, the gas is released, or desorbed.

We specialise in generation systems that are designed and built for the correct flow, purity and pressure for each application. Our nitrogen gas generator produces raw nitrogen of 93±3% purity. Our gas generators are of optimum quality, durable, easy to handle and designed to function on-site at your physical plant, remote location or virtually anywhere you need them.

Nitrogen Generator

adva6687 — Tue, 10 Nov 2020 08:14:07 +0000

Pressure Swing Adsorption (PSA) is a well-established process for the separation and purification of a wide range of industrial gases. PSA is generally safe, reliable and cost effective. The PSA process works at basically constant temperature and uses the effect of alternating pressure and partial pressure to perform adsorption and desorption. Since heating or cooling is not required, cycle time can be short – in range of minutes. Heat is also not required for the regeneration of the adsorbent. Changes in temperature are caused only by the heat of adsorption and desorption and by depressurization. This results in an extremely long lifetime of the adsorbent material. A large range of flow and purity combinations can be met by adjusting the size of the air compressor and adsorption vessels containing the Carbon Molecular Sieves (CMS). PSA can economically produce nitrogen gas at flowrates from less than 140 Nm³/h to greater than 1700 Nm³/h, and at purities ranging from 95% to 99.9995%.

Fiber Laser Marking Machine

adva6687 — Tue, 10 Nov 2020 08:09:55 +0000

The fiber laser marking system adopts the integrated design, with compact size, low consumption, long life-span, high efficiency, free from maintenance, with a superior laser beam, and precise light spot, it is no need of consumable items.

Applicable Industry: It is widely used in the electronics separation components, integrated circuit, electrical engineering circuit, mobile communication, hardware, tools, kitchen wares, tool fittings, precise apparatus, eyeglasses and clock, computer keyboard, jewelry accessories, plastic buttons, water heating fittings, sanitary ware, PVC pipelines, medical apparatus and packing container, etc. Applicable Material It is capable to curve the metal materials and partial non-metal materials, especially suitable for some fields required more precise and higher smoothness.

Advantages: Superior beam of light: the definition is 1 micron, ten times as that of traditional products. Low consumption

Fiber Laser Cutting

adva6687 — Tue, 10 Nov 2020 08:06:58 +0000

The fiber laser systems is an all-in-one solution for cutting mild steel, stainless steel and aluminum. The system can be configured to cut different thickness with the cutting speed you need.

The optimum parameters for each guiding machine and cutting task as well as each material type and thickness are selected from an integrated technology database. These parameters, e.g. laser output, focus position and gas pressures are adjusted automatically from the database.

The fiber laser operates at > 40% efficiency and is maintenance-free and provides a constant and excellent beam parameter product across the entire power range.

Kjelberg PA-S70 W

adva6687 — Tue, 10 Nov 2020 08:03:27 +0000

Top Features

Focus the arc for different material thickness.
Cut from 3 to 70mm
Superior and clean cut with fast speed

Input Power

415V/3/50

Processes

Plasma cutting for mild steel, stainless steel, aluminum